Electronic cigarette: instruction manual. Instructions for using electronic cigarettes Instructions for using electronic cigarette xtr

18.08.2020

There are certain difficulties in figuring out how to use them. But in fact, there is nothing easier than using an electronic cigarette and now we will show and tell you everything in order.

Preparing for use

The first step is to fully charge the cigarette battery, even if it already has some charge. Use and charge the battery for at least eight hours for the first time.

After that, fill the special clearomizer. To do this, unscrew the head of the evaporator, it is often called the base, and carefully fill it along the wall. It is not recommended for liquid to enter the central ventilation duct. The evaporator can be considered fully charged when 70-80% of its entire capacity is filled. Then screw the head back in place and connect the clearomizer to the battery.

Attention! Do not use empty cigarettes, as this can damage them or cause discomfort while smoking.

Immediately after refueling, at the first puffs, the steam can be several times less due to the fact that the liquid has not yet fully entered the evaporator.

How to smoke e-cigarettes properly?

With the correct use of these cigarettes, you get the maximum pleasure from smoking. There are not many secrets here: we press the button and slowly draw in the steam. The key moment is precisely in a leisurely measured sipping of steam. Due to this, the liquid will evaporate more efficiently and more voluminously than with strong puffs. If you pull it hard, then nothing will have time to evaporate and the liquid can generally get into the mouth.

How do I charge the battery?

To charge your e-cigarette, connect the charger to the mains (or other power source) and then screw the battery onto it. In this case, the indicator of the charger will either go out or change its color (depending on the specific model). After 3-5 hours, charging will be completed and the green indicator on the charger will light up.

Precautions:

Avoid use in highly humid environments and high temperatures.
Protect cigarettes from mechanical damage
If the battery becomes suspiciously hot, swollen, or begins to emit unpleasant odors, then stop using it urgently.
Use only native chargers, each model is equipped with only its own type of charger.
Keep devices and all e-cigarette accessories and consumables out of the reach of children and pets.

The heating element must always be in contact with the liquid, watch this and refill it in time.
Keep the contacts on the evaporator and the battery clean, there should be no dirt and especially moisture. Clean them if necessary.
Smoke in a measured way, without sudden breaths and strong puffs. The main difference between electronic cigarettes and their smoky counterparts lies precisely in the fact that the volume of smoke (vapor) does not increase with powerful puffs. Everything works exactly the opposite - you need to make smooth and long puffs, then you get a maximum of steam.
Do not smoke while lying down. All the liquid flows down and does not fall on the heater, so you can get only an unpleasant aftertaste of burning.
Occasionally clean the evaporators and rinse the fluid reservoirs and mouthpieces with warm water or alcohol.
If the e-cigarette is very hot, check the cartridge, it may be empty. But sometimes this is a consequence of frequent puffs, when the evaporator simply does not have time to cool down.

Read about proper use and care in the article - "

Despite its simplicity, the electronic cigarette is a rather complex product from a technical point of view. In addition, a gadget without proper care becomes capricious and may fail. When using a vape, the user needs to adhere to simple rules for the device to be effective and durable.

Newbies in vaping are primarily interested in the question of how to assemble and refuel their first purchased e-cigarette. Let's consider this process using the example of several popular devices.

Eleaf iJust 2

If you purchased the basic set of an electronic cigarette, for example, Eleaf IJust 2, then opening the package, you will see a battery, a clearomizer, a USB cable and a silicone ring (used to adjust the tightening force by closing the air inlets), as well as instructions for use, which describes in detail how to use the gadget.

To collect the vape, just screw the clear to the battery pack... The battery is charged via the USB port of a computer or laptop. Can also be purchased separately network adapter for charging the battery from the network.

To fill the device with vaping liquid, do the following.

Unscrew the flask from the evaporator.
Take the vaporizer in your hands and, while gently turning it, saturate the wick with liquid so that the liquid does not fall into the central hole.
Also put liquid in side holes on the evaporator. The wick must be soaked with slurry very abundantly: in this case, it is better to overfill than underfill. If this is not done, then when the coil is turned on, the poorly soaked places on the wick will burn, and a burning smell will appear during vaping.
After the wick stops absorbing the liquid, pour it into the tank through the special holes, as shown in the following figure.
You can fill the tank completely, but you do not need to overfill the slurry.
After refueling, screw the flask onto the evaporator.
Check for leaks.
Screw the clearomizer onto the battery pack. Wait a couple more minutes for the liquid to saturate the wick well, after which the device is ready for use.

The improved model of the iJust s device provides top filling tank with liquid: the upper part of the tank is removed and the required amount of liquid is poured, as shown in the following photo.

EVOD CE5

The basic package of the EVOD CE5 vape consists of the following components:

rechargeable battery EVOD 1100 mAh;

clearomizer CE5;

uSB charging cable with connector suitable for EGO batteries;

1 bottle (11 ml) with a liquid of your choice.

The assembly of this vape is also very simple: twist the clearomizer and the battery together. The battery is charged by PC or laptopas mentioned above. Refueling this device is distinguished by its simplicity:

first, you should unscrew the mouthpiece;

after disconnecting the mouthpiece, you need to take a bottle of liquid and fill it in such a way that it flows down the walls, bypassing the central hole;

on average, the flask should be filled up to half or a little more;

after refueling, screw the mouthpiece back into place and check that the liquid does not flow out, after which the device can be used.

Joyetech eGo AIO

The starter kit for the Joyetech eGo AIO device includes the following components:

vape complete (with a mouthpiece), but without a vaporizer;

2 replaceable BF 316SS stainless steel evaporators with 0.6 ohm resistance;

glass mouthpiece - 1 pc .;
charging cable (micro USB);
instructions for use.

Assembling the vape is quite simple, as shown in the following figure.

But the device is charging after micro USB portbuilt-in on the side of the device.

The battery can be charged from a PC or from an AC adapter (purchased separately) with a DC 5V output. When the battery is fully charged, the indicator located on the button turns off.

But the fact that you put all the components together is not enough to get the device started. You also need to pour liquid into it. This is done as follows:

Unscrew the atomizer base from the device case.
Take the new evaporator (supplied) out of the package.
Take the liquid and put it in the hole to soak the wick well. The wetting should be very profuse and continue until the liquid is no longer absorbed.
There are 2 holes on the back of the atomizer, into which you should also drip liquid, after which you need to remove the remnants of the latter from the contact (pin). You can use a tissue or toilet paper to do this.
After impregnation, attach the atomizer to the base.
Now you can fill the liquid in the e-cigarette flask itself. When refueling, pay attention to the mark on the body of the vape, with the word “max”. Slurry must not be poured above this line.
After refueling the flask, screw the base with the atomizer to it. Now the vape is completely ready for use.

How to turn vape on and off

Many beginners, not having read the instruction manual for the vape, trying to turn on the gadget, are frustrated and panic because their electronic cigarette does not turn on. This happens for the reason that modern vapes are protected against accidental activation, for example, in a pocket or bag. To unlock the vape, as well as turn it on, you need to press the key 5 times within 3 seconds... If you want to turn off the device after vaping, repeat the same procedure again.

If your e-cigarette does not have any buttons, it means that it will automatically activate when you puff.

How to set up a vape

The electronic cigarette in the form in which it was presented above does not need special settings. Unless you can adjust the tightening force. Also, some more "advanced" vapers try to rewind the spiral themselves, in order to change its resistance, to achieve different taste sensations while vaping.

For vapers who are no longer satisfied with the standard electronic cigarette, there are so-called box mods, representing a battery pack. The mod is equipped with an electronic control board and a small display. Thanks to the electronic filling, it becomes possible to more accurately adjust the vape to the needs of any bather. Therefore, the adjustment of the vape is to adjust several parameters.

Power

This refers to the power that acts on the spiral of the atomizer (steam generator). The larger the spiral, the more power can be applied to it. But everything must be within reasonable limits, otherwise the heating element may burn out. Also, the selected power directly depends battery discharge time: The higher it is, the faster the battery will drain. It is recommended to set the average power value - from 15 to 20 W.

If the power value is exceeded, the following negative points may appear.

The battery will quickly lose power.
The case will become very hot (sometimes it is difficult to hold the vape in your hands). In this case, the device must be turned off and allowed to cool down for a while.
maybe burning of the wick, and as a result - a burning taste while vaping.

Varivolt

The varivolt function allows you to manually change the voltage supplied to the coil. Moreover, the power will depend on the resistance of the heating element. Based on this, it turns out that the volume of the inhaled air-vapor mixture depends on the voltage.

The principle of operation is quite simple: the higher the voltage value is set on the fashion, the more the spiral heats up, as a result of which the amount of steam increases and the aroma of the slurry is revealed brighter. But if the voltage is exceeded, the wick will burn, and a burning taste will appear. Therefore, this parameter is selected by trial and error.

When changing the clearomizer (with a different resistance) again by the selection method, you will need to adjust the required voltage in order to achieve the required results.

Varivatt is the ability to adjust the power of the vape, if you changed the resistance of the coil, it is improved version of varivolt... If your mod has a “varwatt” function, then, as a rule, there is no need to manually adjust the voltage. This is because the voltage automatically adjusts to the resistance of the heating element. Thanks to the “variwatt” function, as in the Kangertech KBOX 120-200W box mod, a more precise vape adjustment takes place, allowing you to achieve maximum results from the device without breaking the coil.

This function allows the vaper to use the device comfortably. It is enough just once to set the power that is comfortable for the bather and not to worry when changing clearomizers, what is their ohmicity. The mod will adjust itself to the resistance of the clear and equalize the power to the previously set values. Therefore, whatever clear you set, the power will not change, and the bather will always be able to observe a lot of smoke.

Thermal control

This function is not available for all vapes. But if it is present in your gadget, then you do not need to configure it... The thermal control works in a fully automatic mode and is available only when a nickel or titanium coil is installed in your device. Only such metals can the electronic filling of the vape work.

The thermal control works as follows: if the temperature of the coil reaches a critical level during vaping, then the power is reduced so that the heating element can cool down. For a vaper, this process usually goes unnoticed.

Vapor rules

Vaping novices who are accustomed to smoking traditional cigarettes often make mistakes while vaping. As a result, side effects such as overheating of the device, leakage of liquid from the mouthpiece, the appearance of a burning taste, and others may occur. But, if you use the gadget, adhering to the following rules, then all these troubles can be avoided.

First puff rule... It must be observed every time you are going to start vaping. It consists in the fact that the vaper should take the shortest possible puff so that the wick begins to be well soaked in liquid, as if lighting a cigarette before starting to smoke.
It is recommended to first take steam into the mouth, and then try to inhale it into the lungs. Do not inhale deeply right away, as the vaping liquid can be quite strong. To get used to the steam, take 10 to 12 short and, if possible, shallow puffs. This is how many puffs it takes to smoke a regular cigarette.
Follow frequency and depth of puffs... Shallow but long puffs will allow the atomizer to generate a rich and dense vapor. Avoid sudden breaths - this will cause condensation to form, which can get on the battery contacts and cause a short.
Do not hurry... The fact is that when tightening, the spiral heats up, which, in contact with the wick, evaporates the liquid. It is necessary to let the spiral cool down, and to fill the wick with liquid the place from which it evaporated. If you take frequent puffs, the wick will burn, and the spiral will overheat.
Hold the vape correctly... While vaping, the device must be held in such a way that it is slightly tilted. Thanks to this position, a more uniform flow of slurry into the evaporator occurs.
In some mechanical models of electronic cigarettes with a button (mech mods), in order to take a puff, you need to simultaneously press the button on the gadget body while inhaling, and after it is finished, release it. Some vapers like to use the mech mod, but most still prefer the automatic inclusion of steam.

Security measures

When using the vape, you must follow the safety rules.

Do not let the liquid get into your eyes, mucous membranes and tongue. Moreover, you cannot swallow it - this can cause poisoning.
Avoid direct sunlight and do not keep the device in a room if the temperature is high.
Take all measures to ensure that the electronic cigarette did not fall into the hands of children.
Do not clean the gadget connected to the charger. Before preventive cleaning of the vape, it must be turned off (by pressing the button 5 times) and disconnected from the charger if the device was connected.
Do not charge the vape in a damp room or outdoors in wet weather.
Can't hover while driving... Remember, vaping is dangerous while driving, as the thick cloud of steam interferes with vision.

Smoke rings are easy

Well, you have learned to smoke, that is, to vape. What's next? Bored smokers have long figured out how to make this process more interesting. It consists in blowing smoke rings. Vapers have successfully adopted this experience and offer 3 basic ways to do this trick from steam.

Draw lots of steam into your lungs. Put your lips together as if you are pronouncing the letter "O". In this case, the tip of the tongue should be fixed in the center. Exhale briefly and lightly, as if coughing. After a few workouts, you will be able to make beautiful and even rings.
Take a lot of steam, then roll up tube lips and pull them forward slightly (tongue help is not needed). Push the steam out of your lungs as quickly and as often as possible. With this method, the first and last rings are not obtained, but in general, the result is quite good.
This way of making rings is called method "W"... If you master it perfectly, you can make very beautiful and even rings of smoke. But first, learn how to pronounce the English letter “W” correctly. It sounds like "Ay" or closer to "Oh". After practicing the correct pronunciation, you can start learning to blow rings from steam. Take steam into your cheeks, then fold your lips as if preparing to utter the sound “O” and say the letter “W” while blowing smoke from your mouth. When you pronounce the English letter, your lips should be as tight as possible. To change the size and clarity of the rings, you can change the lip circumference.

Any vaper can learn how to properly release steam rings, as in this video. But vaping fans went further and started to complicate the process. For example, you can release a jellyfish-like fog cloud like in the following video. Enjoy your soaring!

Modern electronic cigarettes turn on automatically at the moment when the steam generator detects the presence of traction and automatically turns off when there is no traction.

How do I know if I need to recharge the battery?

Electronic cigarettes signal the discharge of the battery with a tip (indicator light). The indicator starts flashing for about 10 seconds. E-cigarette kits include 2 batteries so you can continue to use the device while a dead battery is being recharged.

If you feel a small amount of steam, or do not feel it at all, it means that your battery is completely discharged. Check if the battery is installed correctly, if the cartridge is installed correctly. Also, check the cartridge to see if it needs to be replaced.

How long does the battery last and when does it need charging?

The energy reserve in electronic batteries is several hours, depending on the type of battery (types: classic electronic cigarette, electronic mini cigarette, electronic tube). It also depends on the intensity of cigarette use. The longevity of the battery also depends on the intensity of use and on compliance with the rules for discharging / charging the battery. (The battery must be fully discharged - then fully charged). We advise you to bring spare batteries and chargers when traveling or for events where frequent cigarette use may occur.

How long does it take to recharge the batteries?

It depends on the type, but on average a new battery should be charged for the first time within 4 hours. All subsequent recharges take approximately 2 - 3 hours.

Most chargers have an indicator that glows red when charged and turns green when the battery is fully charged.

How many times can the battery be recharged?

It depends on the type of e-cigarette used (types: classic e-cigarette, mini e-cigarette, e-tube). On average, the battery can be recharged about 300 times.

What are the main benefits of electronic cigarettes?

100% imitation of smoking.
Possibility of gradual reduction of the consumed nicotine without quitting the smoking habit.
There is no dependence on harmful tar, nicotine and products emitted when burning tobacco and paper in ordinary cigarettes.
There is no smell in the house, from clothes, from hands.

What is the smoke emitted from an electronic cigarette made of?

Compared to conventional cigarettes, simulated smoke is vapor from a nicotine-containing liquid. This smoke is nothing more than steam that evaporates in the air within a few seconds and does not leave any smell on it. The steam does not contain unwanted chemicals as there is no chemical reaction or combustion process.

How much nicotine is in the cartridges?

The replacement cartridge may contain nicotine. Nicotine is a naturally occurring alkaloid found in tobacco leaves and other plants that contain nicotine. It is the main substance that makes smokers addicted. When a person smokes, nicotine enters the bloodstream after 7-9 seconds and the smoker develops a physiological satisfaction response. Over the years, Nicotine Replacement Therapy has been shown to be effective and safe for smoking cessation according to many expert opinions and many clinical trials. Free from harmful substances such as tar and carbon monoxide, the cartridge can minimize the harm from smoking for most second-hand smokers; at the same time, this simulated smoking can reduce discomfort during the quitting time, since the cartridge contains only a small amount of pure nicotine. A test for the toxicity of a nicotine-containing cartridge by a number of reputable organizations confirms its safety.

The cartridges have different levels of nicotine content. Nicotine levels range from 0 to 18 mg, with some being higher. Each level is designed according to real cigarettes in the following order:

Extra high. 24 mg of nicotine. Like cigarettes "Belomorkanal" without a filter.
High content (HI) of 16 mg (or 18) nicotine cartridges, about the same as conventional cigarettes.
The average content (MED) is 12 mg (or sometimes 11 mg) nicotine, about the same as in light cigarettes.
Low content (LOW) 0.6 mg nicotine, about the same, super lung.
Extremely low nicotine content 0.3 mg.
Zero content (NO) 0 mg nicotine.

How many cigarettes does one cartridge replace?

Different smokers use different brands of cigarettes that contain different amounts of nicotine. For example, on the label of a regular pack of cigarettes, 1.1 mg of nicotine is indicated, which means that each cigarette in the pack contains 1.1 mg of nicotine. Thus, one pack of ordinary cigarettes (20 pieces) contains nicotine in an amount equal to 1.1 mg * 20 \u003d 22 mg. One cartridge can be smoked in more than 300 puffs, which is equivalent to one pack of conventional cigarettes with an equivalent nicotine content. According to the nicotine content, replacement cartridges are divided into four types: strong, medium, light and nicotine-free. Strong (nicotine content: 18 mg) Medium (nicotine content: 11 mg) Light (nicotine content: 0.6 mg) Nicotine-free (nicotine content: 0 mg)

Using the cartridge:

Cartridge - For use with the Electronic Cigarette only.
The cartridge is a disposable product, do not reuse it. Please dispose of it properly after use, and do not allow the cartridge to fall into the hands of children.

Precautions when using the cartridge:

Storage: Keep cartridges in a cool dry place.
Please keep cartridges out of reach of children.
Please do not use the cartridge after the expiration date. The shelf life of the cartridge in the package is 24 months.
Avoid getting nicotine liquid on the oral mucosa.
It is forbidden to use by pregnant women, persons under the age of 18, as well as with medical contraindications to smoking.
The nicotine-containing liquid in the cartridge is prepared in strict proportion. Mixing with other liquid is prohibited.

Cartridge - designed according to the "Nicotine Replacement Therapy" recommended by the World Health Organization (WHO). This therapy allows smokers to gradually reduce the amount of nicotine they have absorbed. It is recommended that users use a cartridge appropriate for their type of cigarette and then gradually and painlessly reduce the nicotine content to a nicotine-free cartridge.

What is nicotine?

Nicotine is an alkaloid produced in certain factories, found primarily in tobacco, and lower levels in tomatoes, potatoes, eggplant, cauliflower, green peppers and some teas. When absorbed in small amounts, from cigarettes, cigars, or pipes, nicotine induces arousal, feelings of relaxation, calmness, and alertness. The effects of nicotine can last anywhere from a minute to several hours. Nicotine is considered an addictive habit.

For comprehensive information on nicotine, refer to the article Everything you wanted to know about nicotine, but were afraid to ask.

Does nicotine cause cancer?

It is believed in the medical community that nicotine does not cause cancer. Nicotine research is ongoing, and medical research has found some advantages and disadvantages of nicotine consumption. The main cause of cancer is considered to be the tar released from the combustion of tobacco.

How long does an e-cigarette cartridge last?

It all depends on the intensity of use and the type of device they are using. Here is a rough breakdown of each type:

One cartridge - “classic cigarette” type should be enough for 15-20 ordinary cigarettes.
One tube cartridge should be enough for 25-30 or more regular cigarettes.

What is the shelf life of e-cigarette cartridges?

If stored in a cool, dry place, the average life is 24 months.

Can I refill my cartridges?

Yes. For this, there are fluids for refilling cartridges.

The cartridge allows two refills, subsequent refills become ineffective.

You can refill any cartridges, any e-liquids. (Nicotine content and flavor are irrelevant).

How do I know if the cartridge needs to be replaced?

This will be noticeable in the declining pair. As the cartridge is emptied, the steam will decrease.

It is possible that the steam has decreased due to the discharging battery. If, after replacing with a freshly charged battery, there is still little steam, you should replace or refill the cartridge.

Are there guarantees for e-cigarettes?

Yes. The warranty covers the steam generator and charger.

The warranty may be denied if there is mechanical damage on the electronic cigarette.

Is there a smell after smoking an e-cigarette?

There is a smell / aroma when smoking e-cigarettes. The scent depends on the selected cartridges.

Since an electronic cigarette simulates the smoking process and emits not smoke, but steam, there will be no smell from clothes, hands, as well as a smell in the room.

Can I smoke e-cigarettes in public?

Yes. Since they are non-flammable, do not contain tobacco, and do not produce smoke, this is not a form of smoking that is prohibited in public places.

Many people use such cigarettes without problems and complaints in restaurants, bars, airports, airplanes, workplaces, and many other places where tobacco smoking is discouraged or even prohibited.

Are minors allowed to buy e-cigarettes?

None of the minors have the right to use and buy electronic cigarettes.

Can i use e-cigarettes if i am pregnant?

Electronic cigarettes should not be used by pregnant or breastfeeding women.

Are e-cigarettes really less harmful than regular cigarettes?

You can read the Tobacco Products Interview and Alternative Methods for Replacing Smoking Tobacco.

Do e-cigarettes smell like regular cigarettes?

Conventional tobacco-flavored cartridges are somewhat similar in flavor to tobacco cigarettes, but have a softer / smoother and less harsh taste. The cartridges also have a huge variety of other flavors that you may like more than tobacco flavors.

Do e-cigarettes require any maintenance?

The only service required is to charge and change batteries, change cartridges.

You should also keep e-cigarettes, cartridges and components away from water and heat.

There are programs in which cartridges are sent to you in a certain month and in a certain quantity. Participation in these programs is voluntary and sometimes reduces the cost of the cartridges.

Any other question or concerns I should be aware of regarding e-cigarettes?

Electronic cigarettes are allowed for use only by addicted smokers over the age of 18. Children, pregnant women, breastfeeding women, people with heart disease, high blood pressure, diabetes, or those taking asthma medications are not allowed to smoke.

Before that, we recommend reading our article what is electronic Cigarette and get acquainted with the principle of its work.

Preparing for first use

First you need to charge the battery of your electronic cigarette using the supplied charger. The first time charging should take at least 8 hours, regardless of the indication on the device.

Then you should fill the container evaporator (clearomizer) filling liquid for your electronic cigarette. To do this, unscrew evaporator head (base) from the evaporator and pour in liquid at a moderate rate along the walls so that it does not enter the central ventilation hole. The full charge of the clearomizer is about 70-80% of its maximum volume. After finishing refueling, screw the base back on. Combine the evaporator and battery by screwing in the evaporator.

Comment! Avoid using a cigarette with an empty vaporizer - this can damage the cigarette or make you feel uncomfortable smoking.

Also note that a few puffs will initially produce less steam than standard as the evaporator must be saturated with liquid.

It's important to know! In order to use the electronic cigarette correctly, it is necessary to draw in steam, when pressing the button, not too fast so that the liquid in the clearomizer has time to evaporate. Unlike regular cigarettes, the harder you puff, the less vapor you inhale! And in some cases, with a very strong retraction, liquid may get into the mouth, since it did not have time to evaporate at all. To avoid this situation, smoke an electronic cigarette measuredwhile slowly drawing in steam.

Accumulator charging

To charge the battery, first connect the charger to a power source, and then screw the battery into the charger. The indicator should change color or go out, depending on the model, upon completion of charging (about 3 hours).

Precautions

Do not use in extremely humid conditions or high temperatures.

Try not to mechanically damage the device.

If the battery becomes too hot and starts to emit an unpleasant odor, stop using it immediately.

Chargers for each e-cigarette model are unique.

Keep all accessories and consumables, as well as the cigarette itself, out of the reach of children and animals.

Make sure that the heating element always comes into contact with the liquid and refuel the evaporator on time.

The contacts of the battery and the evaporator must be free of condensation, dust and moisture. Wipe the contacts with a tissue from time to time.

Smoking a cigarette should be leisurely without sharp puffs, since, unlike a regular cigarette, sharp puffs do not increase the amount of smoke. In general, in the case of an e-cigarette, the longer the puffs, the more vapor is generated. However, puffs longer than five seconds can cause the coil to overheat, so be careful.

You should not smoke an e-cigarette lying down, because when the cigarette is upright with the mouthpiece down, the liquid flows from the evaporator head and an unpleasant burning taste in the mouth may appear.

Read more useful information on the website

The Evod electronic cigarette is the most budget-friendly model from the KangerTech manufacturer. It is packed in a branded cardboard box. The package includes the cigarette itself and the charger. Many novice vapers do not read the instructions, therefore they use and charge this device incorrectly. This could cause serious damage to the device, overheating of the battery, or a short circuit.

Instructions for use

The Evod line of electronic cigarettes includes devices such as:

Evod Twist III.
Evod PRO V2.
Evod MT3.
Evod Silver (1453) and others.

An electronic cigarette consists of several parts:

The battery is the bottom of the e-cigarette with the "Fire" button on it.
An atomizer that is screwed onto the top of the battery.
Top tank cap, which is put on top of the evaporator. The tank has special transparent walls for checking the liquid level.
Drip tip (mouthpiece).

Operating Instructions for Kanger Evod Electronic Cigarette:

1. Before using it, you need to take the electronic cigarette in your hands and unscrew the clearomizer from the battery.
2. Next, charge the battery. To do this, screw the charger into the upper part and connect it to the mains. A red indication on the button will indicate charging. When fully charged, the display will turn green. This device contains a 1100mAh Li-ion battery, so it needs to cycle from full discharge to full charge 3 times in a row for a long service life.
3. After the battery is charged, take the atomizer in your hands, turn it upside down, unscrew its lower part and fill with liquid. It must be poured on the sides, so that it does not fall into the air duct. In the future, you need to follow through the transparent walls so that the liquid does not fall below the top of the evaporator wick.
4. Then screw the lower part of the atomizer and screw it to the battery. Turn the device over and wait 1-2 minutes for the evaporator to be saturated with liquid. It is extremelyimportant stage -otherwise, the vaporizer may give off bitterness.

After that, you can turn on the electronic cigarette. If, after pressing the button, it does not respond, it is worth turning off the lock.

To do this, press the "Fire" button 5 times. If it blinks, this is a signal that the device has been successfully unlocked and you can start hovering.

To lock the device, you must also press the button 5 times. Thus, spontaneous pressing can be prevented while the electronic cigarette is in the bag or in other places where it should not be switched on.

The characteristics of the various models of the line are presented in the table: