There are four main ways to polish your glasses. It will be useful to know: how to remove scratches on sunglasses? How to polish plastic glasses

If the glasses are neglected and the storage conditions are not followed, scratches appear on the surface. In turn, this leads to image distortion, eye fatigue and impairment of vision. We will tell you in our article about whether it is possible to remove scratches from glasses or if you still have to buy new optics. Consider several options for solving this problem based on the characteristics of the material from which the lenses are made.

For storing glasses, special cases are provided that protect the lenses from scratches. However, many people disregard this rule. As a result, their glasses are often subjected to mechanical stress from the outside. It is the failure to follow the recommendations of opticians that leads to the need to figure out how to remove scratches from glasses.

• If you find a scratch, contact your optician first. Most likely, the specialist will be better at removing this flaw from the lens.
• If you frequently scratch your lenses, check with your optician for a protective coating for them.
• Never start removing scratches from dirty lenses. Wash them thoroughly in warm soapy water before starting work.
• If, when removing scratches from sunglasses the anti-reflective coating has deteriorated, it is recommended to remove it completely with a cream, then the visibility will significantly improve.

How to remove a scratch from glasses with toothpaste

Even tools at hand can be effective against scratches on glass lensesah points. For this you only need toothpaste no abrasive particles and soft felt. Chalk is also suitable, which must first be turned into powder.

Let's consider step by step how to remove scratches from glasses:

1. A small amount of toothpaste is applied to a piece of felt.
2. The lens surface is polished in a circular motion. The toothpaste may be applied to the fabric several times as you work.
3. It is strictly forbidden to use pastes with solid particles, which can additionally damage the glass.
4. Similarly, you can remove scratches with chalk. It is slightly moistened with water and the surface of the glasses is polished with felt.

There is no doubt about the effectiveness of the paste, but it is necessary to figure out how to remove scratches from glasses using this well-known tool. To work more conveniently, it is recommended to remove the lenses from the frame (if they are screwed on with screws). Next, GOI paste must be applied to felt or thick cloth, and the lens must be placed on top (with the scratched side on the fabric). With circular movements of the lens, polish the surface. It will take a different amount of time for the scratch to completely disappear, depending on the size of the damage to the glass.

After processing the surface of the lens, it will be necessary to wash it in warm water from the remaining paste and insert it into the frame.

Small scratches are easily removed this way. To remove more serious damage, you will need a sander with a felt wheel, car polish and GOI paste. This method is effective only when working with ordinary glasses, without tinting and special protective coatings, since the entire surface of the lens is processed.

How to remove scratches from plastic eyeglass lenses

Even deep scratches from ordinary glass are usually removed quite successfully, which cannot be said about plastic lensesoh. As a rule, such glasses have an additional protective coating, which immediately collapses when trying to get rid of damage to the optics. In turn, new scratches on uncoated lenses will appear very quickly.

Before starting work, you must thoroughly clean the lenses from dirt using microfiber. After that, a special abrasive containing hydrofluoric acid is applied to the plastic. As a result of the reaction, the top coating of the plastic is removed along with the scratches. However, this method is applicable only for plastic, but the glass surface from the reaction of hydrogen fluoride with silicon oxide will be hopelessly damaged. It is important that gloves are worn when applying the abrasive to your hands. After finishing the treatment, the lenses are well washed in cold water.

Since this method completely removes the anti-reflective coating, it can only be called a temporary method of cleaning the lens surface. In the future, it is still recommended to purchase new glasses.

How to remove scratches from sunglasses

The above method removes scratches from sunglasses, the lenses of which are made of plastic. This will also require an abrasive agent with hydrofluoric acid in the composition. Just before removing scratches on glasses (sunglasses), it is necessary to carefully prepare the surface and clean it from dirt. Then you need to act according to the instructions described in the previous paragraph.

If the sun protection coating was of poor quality, then most likely it will deteriorate. Then, using the cream, it is completely removed, after which the glasses are used as directed.

Even if you treat your glasses very carefully, scratches are often formed during use. These can be small, almost invisible to the eye, roughness or large damage. In any case, it looks ugly, but for the owner of the accessory it deforms the outlines of objects and people, keeps the eye muscle in constant tension. What to do? What actions can be taken to solve the problem at home and what funds to attract, read about this below.

Examine your glasses carefully. If the lenses have small abrasions, roughness, scratches, you can deal with them yourself using available tools: soda, toothpaste, alcohol, soap... If the scratch is deep, then it is not always possible to fix the problem with your own hands. Often this may require a grinder or hydrofluoric acid abrasive.

Important! No home remedy can be used with full guarantee that the surface of the glasses will disappear. If unsuccessful, you should seek professional help from an optical store.

Plastic, polaroid, lenses - how to choose a product?

Glasses can be made with glass or plastic lenses. Some of them have a polarizing filter developed by Polaroid. These are complex optical constructions consisting of 7-11 layers with UV and anti-abrasion protection. There are different ways to remove scratches for each type of lens. And if it is easy to remove flaws from a plastic surface, then working with glass is much more difficult (we will talk about this below).

And here polaroid lenses are best not to try to correct yourself... Experts will tell you whether it makes sense to grind them or if the optics should be replaced immediately.

Often, goggles that protect your eyes from bright sunlight become covered with small scratches that can reduce visibility through the lens. Sometimes this results in a violation of the polarization of the glasses, which disorients skiers and golfers. To remove scratches from the surface of the glasses, you can polish and fill in the roughness using improvised means. In this capacity are toothpaste, baking soda, car wax or furniture wax.

If toothpaste is chosen for work, then it should be the simplest, without the presence of bleaches for the surface of teeth, herbs, mint, colored gels, abrasive particles that can easily scratch the lens.

Important! If the scratches on the glasses are large, then the lenses need to be replaced. Only shallow, small flaws can be eliminated by the methods considered.

Glass cleaners

Glass lenses in spectacles can be cleaned from scratches and minor abrasions using available home remedies. For work, in many cases, materials are used as the main tool:

• soft microfiber cloth for wiping optics;
• cotton swab;
• a piece of clean soft tissue.

The following are used as cleaning agents:

• food additives - soda, vinegar, alcohol;
• household chemicals - toothpaste, dishwashing liquid, soap, shampoo;
• care compositions - for glass, furniture, metals, silver, cars;
• specialized mixtures - GOI paste, abrasive for glass.

With soda

The most common way to deal with scratches is using baking soda. She can be found in any apartment, because no hostess can do without her. The algorithm of actions is as follows:

With toothpaste

This method is based on the action of microscopic abrasive particles found in the toothpaste. These substances grind gently outer lens layereliminating roughness and damage. To remove scratches, proceed as follows:

• on the outside of the lens, apply a little toothpaste;
• rub this composition with a piece of soft cloth over the entire area of \u200b\u200bthe glass, quickly distributing it in longitudinal movements;
• do not keep the paste on the lens surface for more than a couple of minutes, wash it off with water or glass cleaner;
• wipe your glasses dry with a special microfiber cloth. There should be no traces of the paste or fingerprints on the glasses.

With Goi paste

Glass lenses will get rid of scratches with Goi paste. it technical mixture, which includes finely dispersed chromium oxide and fatty components... The paste is designed for polishing optical glasses, so it easily copes with the task of removing roughness on the surface of household glasses. The method is most popular among the male half of the country's population. If you can remove the damaged lens from the frame, then further work should be continued as follows:

If the rotation of the glass over the paste causes inconvenience in this method, then simply apply the composition to the lens and in a circular motion in one direction, rub it into the lens. If it is impossible to remove it from the frame, you should not refuse to repair it. Try to be careful so that the mixture only gets on the glass and not on other parts of the glasses.

Important! The process is quite lengthy, but the result is usually pleasing: after grinding, the glasses look like new.

With the help of Goi paste, you can treat the damaged area in the same way, but not rub chemical composition manually, and use a low speed sander or shaving machine for polishing. In this case, the knives should be removed and replaced with a napkin.

With vinegar or alcohol

Both products do an excellent job of tackling fine textures when mixed with baking soda. Polishing the lens with the resulting mixture will get rid of shallow scratches, and running water will remove excess from the surface. At the initial stage, you can try to get rid of the trouble by simply wiping the glasses with undiluted medical alcohol.

With shampoo, soap or dish detergent

Any of the listed means household chemicals gently polish the lenses of the glasses. Their action is based on the presence of micro-particles of abrasives that lightly grind scratches and compare the edges. To fix the problem lubricate the glasses with dishwashing liquid or shampoo, then remove the residue with a tissue microfiber or special material for computer screen care. It is not necessary to wash off the residues with water; this is done only if the product is not removed without streaks.

In a similar way, scratches are removed with soap. The liquid composition is applied to the lenses, then removed with a microfiber cloth. If necessary, you can rinse the glass under running water. If scuffs remain, then baking soda should be added to the product.

Silver polished

A liquid product copes well with scratches - polish for silver or copper... The lenses are sprayed with a cleaning mixture that should be lightly rubbed into the surface. Remove unnecessary residues with a piece of soft, clean cloth. If the scratches on the glasses remain, then the procedure must be repeated until they disappear completely.

With special polishes

In addition to the listed mixtures and compositions, many other tools can be used:

The scheme of work is simple: apply the composition to the lens surface, rub it in lightly, remove the residue with a soft cloth... Chemicals can be applied to a clean cloth, and then the glass can be polished with this rag. Best result will give the use of any of these funds, if you first apply a little petroleum jelly to problem areas.

What professional tools are there?

When deep scratches are formed, you need to act in more serious ways. One of them is using abrasive for glasses with hydrofluoric acid... Such a composition is used only if you have to work with plastic lenses, from which the top layer will be removed in the process. If you are ready to part with anti-reflective, anti-abrasive, shading coatings, then buy such an abrasive at a craft store.

Important! Glass cannot be exposed to the mixture, only plastic.

If the listed methods did not give the desired result, you need to seek help from specialists. They have equipment in their arsenal that will allow them to polish the lenses and remove scratches. You will need to pay for the work, although in some optics shops this operation for regular customers will be carried out free of charge.

If shallow scratches appear on sunglasses, it does not harm the eyes, but the matter is much more serious with optical lenses. Even small scratches can distort images, which causes frequent headaches and migraines. In this case, there are three ways out: buy new glasses, replace old lenses, or try to fix the scratches yourself.

There are several ways to remove small scratches from the surface of plastic lenses, and this can be done with the help of household products.

Methods for removing scratches from plastic lenses of glasses

Before using any polish, glasses should be washed in soap and water to remove dirt, dust and other contaminants.

Polish for silver and copper

A small amount of polish is poured onto the surface of the plastic lenses of the glasses and wiped with a soft cloth. At the end of polishing, the remaining liquid is removed with a dry cloth. If the scratches are not completely gone, repeat the procedure.

Wood polish

You can buy wood polish at any hardware store. A few drops of this liquid are applied to the plastic lenses of glasses, a little petroleum jelly is added and the surface is wiped with the resulting composition. The scratches will be filled with the composition and become invisible. It is necessary to wipe the lens composition until the damage disappears completely.

Spray for computer disks

If you have computer disk spray in your home, you can also use it to repair scratched lenses. The special composition of this product easily copes with minor damage not only on discs, but also on glasses with plastic lenses, watch glasses. Remove residues from the lens surface with a soft cloth.

Toothpaste

If toothpaste is used for polishing, it is important that it does not contain abrasive particles. The paste is rubbed in a circular motion into the area of \u200b\u200bscratches, after which the residues are removed with cotton wool dipped in cold water. If the damage on the lenses is deep, the procedure is repeated until they disappear completely.

Soda paste

Soda is diluted in water to a mushy state. Further, the method of application is the same as in the case of toothpaste. After polishing, the plastic lenses of the glasses must be rinsed with clean water.

Wax

For polishing plastic lenses, you can use wax that is made for cars. The product is applied to the surface and rubbed in a circular motion until the scratches disappear completely. At the end, wipe with dry cotton wool or a soft cloth.

Washer for glass

If your car glass washer is good quality, it can also be used to polish the plastic lenses of your glasses. Such a tool perfectly removes scuffs and forms a repellent film, thanks to which the glasses will not sweat during temperature changes.

Glass abrasive

The painting uses an abrasive for glass, which effectively removes scratches on plastic lenses. This product should not be used on anti-reflective glasses. You can polish the lenses with an abrasive only when wearing rubber gloves; after finishing work, remove the remnants with a soft cloth.

Nail polish

You need to act extremely carefully and quickly so that there are no spots and traces of varnish on the surface of the plastic lenses. After applying the product to the scratched area, wipe it thoroughly with a cotton cloth until the product is completely removed.

On a note

Abrasive products should not be used to polish glasses with anti-reflective plastic lenses. Otherwise, the surface will become dull.

If minor scratches occur frequently, a protective film can be applied as a preventive measure.

With constant use plastic glasses from the sun, various defects may occur on the surface of the product. Scratches on glasses distort the image, impair vision and increase visual fatigue. It is important to know how to repair lens damage and use this essential, useful and stylish accessory for a long time.

How and with what to polish plastic glasses?

To store your sunglasses, the product comes with a case that protects the lenses from scratches and other imperfections. But many people are dismissive of this rule, as a result of which their glasses are often exposed to external mechanical stress. Failure to follow the recommendations will result in scratches on the product. You need to know how to get rid of them.

If a defect is found, it is recommended to contact an optician. A specialist in the field knows how to deal with the problem and can help remove scratches on plastic or glass lenses. He can also advise on effective protective coatings for glasses. Never try to remove blemishes from dirty accessories. Before removing the defect, glasses must be thoroughly cleaned. For this they make warm soap solution and in it they clean the product with a microfiber cloth.

Plastic lends itself easily mechanical damage.

If the anti-reflective coating is damaged when removing scratches from plastic lenses, you should completely remove it with cream. This will help improve visibility with the glasses. At home, there are many different methods on how to remove a defect on sunglasses... These are the following ways:

• car wax;
• cleaners for CDs;
• toothpaste;
• wood polish;
• means for cleaning glass surfaces;
• polish for silver and copper, etc.

Car wax

This remedy - good way polishing plastic and glass lenses. In addition to car wax, other types of wax are also suitable, but the one that is designed for processing car bodies is considered the best. These include Turtle Wax. To remove scratches on sunglasses, apply a small amount of the product to the damaged area of \u200b\u200bthe lens and make circular movements, rubbing it into the surface. Both microcracks and deep scratches are filled with wax. After finishing polishing, you need to treat the lenses with a napkin, which should be soaked in alcohol. It is necessary to repeat the procedures 1 time in 4-6 days.

CD Tool

The tool will quickly cope with minor damage.

A special spray for computer disks is designed to clean and polish their surfaces. It contains components with a certain rigidity that help eliminate scratches. These ingredients are abrasive, so spray should be used sparingly. It is necessary to apply a few drops on defects and abrasions of glasses and intensively rub the surface of the lenses with a dry cloth for 1-2 minutes. As a result, shallow scratches should disappear.

Toothpaste

This remedy is the first aid as it is always at hand. To get rid of the glasses from defects, you need to small piece Squeeze out some toothpaste with felt cloth. Then use a circular motion to polish the lens surface. Increase the amount of paste if necessary. It is categorically impossible to use pastes with hard scratching particles. This can further damage the lens. After manipulation, it is necessary to rinse the glasses with water and wipe with a lint-free soft cloth. If it is not possible to eliminate defects during the first procedure, repeat it.

Wood polish

The Vaseline will make the roughness less noticeable.

This method is more often used for plastic lenses, but for shallow damage it is also used for glass. Wood polish is available at a hardware store. Despite the fact that it is intended for polishing wood products, it efficiently removes minor scratches and abrasions from the surface of sun protection lenses. It is necessary to spray a little of the product on the damaged area and additionally apply a few grams of petroleum jelly, then wipe the glasses with a soft cloth. The polish sands out shallow scratches, and strong defects are clogged with Vaseline. It is impossible to completely eliminate scratches using this method, and with a thorough examination, flaws will be visible, however, this method is often used.

Many of us wear glasses. This accessory is used because of poor eyesight or as protection from the sun's rays, and someone pays tribute to fashion or emphasizes their individuality. Good optics are not cheap now, so it is so important to keep them in "working" condition for a longer time. It happens that scratches appear on the surface of plastic or glass lenses, and then the question of how to remove these damage becomes relevant.

Is it possible to get rid of the damage

To the great regret of all owners, any kind of glasses, both plastic and glass, can be scratched. Besides spoilage appearance, such troubles also impair visibility. But the good news is that you don't have to change your glasses right away, because scratches can be removed. To do this, contact a specialist or try it yourself at home.

How and how to remove scratches from plastic sunglasses

If the lenses of your sun glasses are made of plastic, there are many ways to get rid of scratches at home.

Did you know? The prototype of modern sunglasses was made in 1752 by James Askew of England after his invention of blue glass. But he managed to sell only two copies. People considered his creation a completely useless thing.

Before starting work, do not forget to thoroughly wipe your accessory from dirt, dust, fingerprints. You can use a microfiber cloth for this.

Wood furniture polish

In every home, probably, there are tools for the care of furniture. It is best to use a polish, as it contains wax, which helps in getting rid of unnecessary scratches.

Take a small soft cloth or a piece of cotton wool and apply some of the product to the lenses. Slowly start to process the damaged area in a circular motion, no strong pressure is needed. Finally, wipe with a dry, clean cloth. Most likely, the procedure will have to be repeated several times to make the defect invisible.
Can

Copper and silver polish

This polish can be purchased at a specialist store. Take a small amount of the product and apply to the scratch. With a piece of cotton pad of the correct size, start polishing slowly and carefully. It is advisable not to touch the frame. After a while, remove the excess with a dry cloth. Evaluate the result - it is quite possible that you will need to repeat.

Toothpaste or baking soda

You can also use toothpaste or baking soda.

Toothpaste, one might say, is the first aid, because it is always at hand. Therefore, if an unexpected problem arises, then feel free to take a small amount of paste and - into battle. Treat the defect with a circular motion using a cotton pad for 10 seconds, then wait a while and repeat. Finally, rinse with water and dry with a soft, lint-free cloth.

To use baking soda, mix it with water. Take the required amount of the product on a cotton wool or napkin, apply to the scratch and wait a quarter of an hour. Then rinse the glasses with clean water and wipe dry. It should be noted that since soda has disinfectant properties, your favorite accessory will also get rid of germs.

Important! The mixture should have the consistency of a thick paste.

Computer disk polish

Another way to remove nasty small scratches is to use a spray polish to restore laser discs. It can be purchased at specialized computer stores or services. To use this tool for our purposes, it is necessary as follows: apply a spray to the lens and wipe a little with a soft cloth.

Car wax

Wax, which is used in car body repair work, can also be considered a wonderful way to repair damage to glasses. If necessary, go to a car dealer and choose a wax, just buy the minimum amount, because you need very little to polish your glasses.

Apply the substance to the lens, rub in in a gentle circular motion until the scratch disappears. The excess can be removed with a cotton pad or soft cloth.

Colorless varnish is also suitable for our purposes. Due to its properties, this remedy will be the most persistent. But to apply it on the lenses of glasses, you need accuracy and almost jewelry accuracy. So, prepare a wooden toothpick, dip it a little in varnish, apply the product to the scratch. Remember that the varnish should not be thick, otherwise it will dry out before it has evened out. Wait until the varnish is completely dry.

Glass abrasive

Glass abrasives are serious and last resort. You can buy it in specialized stores for artists.

Important! Use this cleaner only on plastic lenses due to the presence of hydrofluoric acid. Also note that any coating on your glasses will disappear after applying the abrasive.

The procedure for getting rid of scratches is as follows:

1. Be sure to wear rubber gloves and prepare a small plastic container.
2. Using a cotton pad or cloth, apply the abrasive to the lenses.
3. Put them in your container and wait a little.
4. Wipe the lenses with a clean cloth and rinse well with cold water.
5. Wipe everything dry.
6. Be sure to throw away all the tools you have used.

Now your glasses are completely scratch-free, but still this method is quite tough and dangerous for your health.

How to polish glass sun glasses

Glass sunglasses perfectly protect your eyes from harmful influence ultraviolet radiation. But on them, just like on plastic ones, small scratches appear over time. Getting rid of them is also possible, there are enough options.

Let's say right away that all of the above methods are useful for glass, except for the use of an abrasive for glass. And in addition, we will tell you about another magical remedy

Paste GOI

You can buy this paste at home improvement stores or hardware stores. It is used for polishing metals and their alloys, as well as glass.

Did you know? The paste got its name from the name of the institute, where it was developed by a group of Soviet scientists in the 30s of the last century. Namely: State Optical Institute, abbreviated as GOI.

To remove defects from glass lenses, use a fine-grained paste (No. 1 and No. 2), dark green in color. You will also need a piece of soft cloth, usually the remnants of felt, felt, at worst, you can take a microfiber cloth.

Now the order of actions:

1. Apply the paste to the fabric surface.
2. Start polishing with gentle, gentle strokes. The procedure is long, at least half an hour.
3. If you have a sander available, then use a felt nozzle for polishing, this greatly speeds up the process, although it requires certain skills.
4. The final chord will be the treatment of the lens surface with a cloth with a drop of any vegetable oil.

Is it possible to polish vision correcting glasses

Unfortunately, if your glasses are corrective, that is, with diopters or a special coating (darkening, anti-reflective, mirror-like), then they cannot be polished, otherwise they may be broken physical properties lenses, and the coating will simply disappear. Therefore, in this case, the scratched lenses must be replaced.